Table of Contents
Advertisement
Component name
Hot-swap disk drive bay 1
Hot-swap disk drive bay 2
Hot-swap disk drive bay 3
Hot-swap disk drive bay 4
Fan 1 (processor fan)
Fan 2 (processor fan)
Fan 3 (PCI-X fan)
Fan 4 (PCI-X fan)
Operator panel
Power supply 1
Power supply 2
Battery
Platform firmware
System VPD module
Notes:
1. The physical location code for the PCI-X slots, when empty, uses the P1/Ix notation, where the '/' identifies an
integrated device (in this case the empty slot). A PCI-X device plugged into the slot uses the P1-Ix notation,
where the '-' identifies a plugged device.
2. SCSI bus IDs are the recommended values. SCSI IDs shown for media devices indicate how the devices are set
if shipped from the factory. Field installations might not comply with these recommendations.
26
NAS Gateway 500 Service Guide
Physical location code
U0.1-P2/Z1-A8
U0.1-P2/Z1-A9
U0.1-P2/Z1-AA
U0.1-P2/Z1-AB
Fans
U0.1-F1
U0.1-F2
U0.1-F3
U0.1-F4
Operator panel
U0.1-L1
Power supply
U0.1-V1
U0.1-V2
Battery
U0.1-P1-V3
Platform firmware
U0.1-P1/Y1
System VPD module
U0.1-L1-N1
AIX location code
1S-08-00-8,0
1S-08-00-9,0
1S-08-00-10,0
1S-08-00-11,0
Advertisement
Table of Contents
