Table of Contents
Advertisement
To test a connection to a remote system unit, select Ping Test from the Network Parameters Menu. After
selecting the Ping Test option, you must select which adapter communicates with the remote system.
Adapter Parameters
Device
1. 2-Gbps Fibre Channel HBA
2. Gigabit Ethernet SX Adapter
3. Gigabit Ethernet TX Adapter
4. Gigabit Ethernet SX Adapter
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
After selecting an adapter, you will be asked to set the parameters for the adapter; a menu similar to the
following is displayed:
Adapter Parameters
Gigabit Ethernet SX Adapter
1. ethernet, 10, rj45, full
2. ethernet, 10, rj45, half
3. ethernet, 100, rj45, full
4. ethernet, 100, rj45, half <===
5. ethernet, auto, rj45, auto
6. Execute Ping Test
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
298
NAS Gateway 500 Service Guide
Slot
4:U0.1-P1-I4/E1
Integrated:U0.1-P1/E1
1:U0.1-P1-I1/T1
3:U0.1-P1-I3/E1
X = eXit System Management Services
X = eXit System Management Services
Hardware Address
000629aca72d
0020357A0530
000629be04e1
0004ac7c9ec7
Advertisement
Table of Contents
