Table of Contents
Advertisement
Scan Log Dump Setup Menu
1. Scan Log Dump Policy:
Currently As Needed
2. Scan Log Dump Content:
Currently As Requested
3. Immediate Dump
98. Return to Previous Menu
0> 1
Select from the following options:
(As Needed=2, Always=3)
Enter New Option:
0>
The scan-log-dump policy can be set to the following:
2 = As Needed
The processor run-time diagnostics record the dump data based on the error type. This is the
default value.
3 = Always
Selecting this option allows the service processor to record a scan-log dump for all error types.
The scan-log-dump policy can also be set from the Tasks menu in the diagnostic service aids.
Chapter 9. Using the service processor
263
Advertisement
Table of Contents
