Table of Contents
Advertisement
Table 10. Firmware checkpoints (continued)
Checkpoint
E602
E603
E604
E605
E60E
E60F
E6FF
E700
E701
E702
E703
E704
E705
E706
E707
E708
E709
E70A
E70B
E70C
Description
SSA PCI open firmware has started.
SSA PCI adapter BIST has completed with
an error.
SSA PCI adapter BIST and subsequent
POSTs have completed successfully.
SSA PCI adapter BIST has completed
successfully but subsequent POSTS have
failed.
SSA PCI open firmware about to exit (no
stack corruption).
SSA PCI open firmware has run
unsuccessfully.
SSA PCI open firmware about to exit (with
stack corruption).
Create system firmware VPD
Create memory VPD.
Create processor card VPD.
Create operator panel VPD.
Create CEC VPD.
Create VPD.
Create VPD.
Create system VPD.
Create VPD.
Create VPD using SPCN.
Create service processor VPD.
Create L3 module VPD.
Create I/O backplane VPD (I2C problem).
Action or
possible failing FRU
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
Replace the adapter.
System firmware might be corrupted.
Reinstall system firmware.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 69.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 69.
Chapter 4. Checkpoints
119
Advertisement
Table of Contents
