Table of Contents
Advertisement
.---------------------------------------------------------.
| THE SELECTED DEVICES WERE NOT DETECTED IN THE SYSTEM ! |
| Press any key to continue.
`---------------------------------------------------------'
If Hard Drive is selected, the following menu is displayed:
Select Hard Drive Type
1. SCSI
2. SSA
3. SAN
4. IDE
5. ISA
6. List All Devices
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
If List All Devices is selected, a menu similar to the following is displayed, depending on the devices that
are installed in the system:
Select Device
Device Current Device
Number Position Name
1.
1
Diskette
2.
-
IDE CD-ROM
3.
-
Ethernet (loc=U0.1-P1/E2)
4.
-
Ethernet (loc=U0.1-P2/I6/E1)
5.
-
Ethernet (loc=U0.1-P2/I6/E2)
6.
-
Ethernet (loc=U0.1-P1/E1)
--------------------------------------------------------------------------------------------------
Navigation keys:
M = return to main menu
ESC key = return to previous screen
--------------------------------------------------------------------------------------------------
Type the number of the menu item and press Enter or Select a Navigation key: _
The appropriate device can then be selected for this boot or installation.
When a device is selected for installing the operating system, or to boot from, the Select Task menu allows
you to get more information about the device, or to boot from that device in normal mode or service mode.
The following is an example of this menu.
|
X = eXit System Management Services
X = eXit System Management Services
Chapter 10. Using System Management Services
301
Advertisement
Table of Contents
