IBM TotalStorage NAS Gateway 500 Service Manual page 140

Table 10. Firmware checkpoints (continued)
Checkpoint
E70D
E70F
E7EE
E7FF
E800
E841
E842
E843
E844
E845
E846
E84F
E850
E851
E852
120
NAS Gateway 500 Service Guide
Description
Create VPD.
Collect CEC VPD.
Delaying while waiting for power subsystem
VPD collection to be completed;
informational only
Successful end of VPD creation
RTAS initialization problem
Initializing RTAS/open firmware device tree
interface
Initializing RTAS/service processor interface 1. Check for system firmware updates.
Initializing RTAS/sensor interface
Initializing RTAS/time-of-day clock interface
Initializing interface/sensor access
Initializing interface/sensor access
Initializing RTAS/operator panel interface
Initializing RTAS/cache interface
Initializing RTAS/hardware access
Initializing RTAS/PCI bus interface
Action or
possible failing FRU
1. Check for system firmware updates.
2. Call service support.
Go to "MAP 1540: Problem Isolation
Procedures" on page 69.
1. Check for system firmware updates.
2. Call service support.
Informational message. If the system hangs
here, go to "MAP 1540: Problem Isolation
Procedures" on page 69.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
2. Replace the CEC backplane
Location: U0.1-P1.
3. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Replace the CEC backplane
Location: U0.1-P1.
3. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Call service support.
1. Check for system firmware updates.
2. Go to "MAP 1540: Problem Isolation
Procedures" on page 69.
3. Call service support.