Snmp - Planet Networking & Communication CS-2001 User Manual

2.8 SNMP

2.8.1 SNMP Agent Settings
Step 1. Go to System > Configuration > SNMP. Under the SNMP Agent Settings
section configure the following:

Tick the interfaces that are permitted to send SNMP agent messages.

Device Name: Name the device. By default, it is UTM.

Device Location: Type the geographic location of this device. By
default, it is Taipei, Taiwan.

Community: Type a screen name. By default, it is public.

Contact Person: Type the email address of the contact person. By
default, it is root@public.

Description: Type a description for the device. By default, it is UTM
Appliance.

Click OK.

Settings completed. From now on, the IT administrator will be kept
up-to-date with the device's operating status through a SNMP Agent
application.
（Figure 2-34）
Figure 2-34 SNMP Agent Settings
79