Planet Networking & Communication CS-2001 User Manual page 16

Important：
1. Any data saved on the interface will be saved as the selected default character encoding if the
device is unable to recognize the encoding.
Step 6. The LAN interface address must reflect your network environment. The
defualt LAN interface is set to 192.168.1.x/24. However, if the LAN
interface was changed to 172.16.0.1 (subnet mask: 255.255.255.0), the IT
administrator must configure each PC in the subnet using an available IP
address from this subnet.

Setting: Select Port1 (LAN1).

Interface: Select LAN.

LAN Interface Mode: Select NAT / Routing Mode.

Fill in the IP Address and Netmask fields.
Important :
1. Note: Once the LAN interface is changed, please enter the new LAN IP address in the
browser next time when you log in the CS-2001 Web UI.
Figure7. Interface Settings
15