Planet Networking & Communication CS-2001 User Manual page 265

Step 9. Settings completed.
Step 10.
Under Policy Object > VPN > Trunk, click New Entry and then set
as below: （Figure 11-41）

Name: Type a name.

Local Settings: Check "LAN". Local IP / Netmask: Type
"192.168.85.0" as B Company's subnet address and "255.255.255.0"
as Mask.

Remote Settings: Select "Remote IP / Netmask". Remote IP /
Netmask: Type "192.168.10.0" as A Company's subnet address and
"255.255.255.0" as Mask.

Tunnel: Select "IPSec_tunnel2" and then add it to the right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
（Figure 11-40）
Figure 11-40 IPSec Autokey Settings Completed
（Figure 11-42）
264