Planet Networking & Communication CS-2001 User Manual page 729

Step 3. Go to Policy > Incoming and then set as below:

Click New Entry.

Select the defined rule ([Virtual IP]Mail_Server_POP3(61.11.11.11))
for Destination Address.

Select POP3(110) for Service.

Click OK.

Click New Entry.

Select the defined rule ([Virtual IP]Mail_Server_SMTP(61.11.11.11))
for Destination Address.

Select SMTP(25) for Service.

Click OK.

Click New Entry.

Select the defined rule ([Virtual IP]Mail_Server_POP3(211.22.22.22))
for Destination Address.

Select POP3(110) for Service.

Click OK.

Click New Entry.

Select the defined rule ([Virtual IP]Mail_Server_SMTP(211.22.22.22))
from the Destination Address.

Select SMTP(25) for Service.

Click OK.
（Figure 24-42）
（Figure 24-43）
（Figure 24-44）
（Figure 24-45）
（Figure 24-46）
Figure 24-42 The First Policy Settings
728