Planet Networking & Communication CS-2001 User Manual page 147

Step 3. Go to Policy Object > Virtual Server > Port Mapping and use settings
you created in Policy Object > Service > Custom.
Step 4. Go to Policy > Incoming and configure as below:

Destination Address: Select the virtual server setting configured in
the previous step.

Service: Select the pre-defined service.

Click OK.
Figure 5-5 Using the Pre-defined Service Settings
（Figure 5-7）
Figure 5-6 Configuring an Incoming Policy
Figure 5-7 The Completed Settings
（Figure 5-6）
146
(Figure 5-5)