Planet Networking & Communication CS-2001 User Manual page 272

Step 8. Settings completed.
Step 9. Under Policy Object > VPN > Trunk, set as below:

Name: Type a name.

Local Settings: Select "LAN". Local IP / Netmask: Type
"192.168.10.0" as A Company's subnet address and "255.255.255.0"
as Mask.

Remote Settings: Select Remote Client.

Tunnel: Select "ipsec1" and then add it to the right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
Figure 11-54 Advanced Settings of IPSec Autokey
（Figure 11-55）
Figure 11-55 IPSec Autokey Settings Completed
（Figure 11-57）
271
（Figure 11-56）