Planet Networking & Communication CS-2001 User Manual page 366

Step 9. Under Policy Object > VPN > Trunk, click the New Entry button and
then set as below:

Type the name in the Name field.

Local Settings: Select LAN. Local IP / Netmask: Enter the subnet
and the mask.

Under the Remote Settings section, select Remote IP / Netmask and
then enter the subnet and mask.

Move VPN_01 from the Available Tunnels column to the Selected
Tunnels column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
（Figure 11-229）
（Figure 11-230）
Figure 11-229 Configuring the Trunk
Figure 11-230 Setting Completed
365