Deploying Cs-2001 Between The Gateway And Lan (Lan1 And Dmz1) - Planet Networking & Communication CS-2001 User Manual

Utm content security gateway
Table of Contents

Advertisement

3.1.7 Deploying CS-2001 between the Gateway and LAN
(LAN1 and DMZ1) for LAN Users and DMZ Users to Access the
Internet
Prerequisite Setup (Note: IP addresses used as examples only)
Gateway: LAN(192.168.1.1), IP range:192.168.1.x/24
WAN(61.11.11.11) connects to the ADSL Termination Unit Remote to
access the Internet.
DMZ (Transparent mode)
Configure Port1 as WAN1 (192.168.1.2) and connect it to the gateway's LAN.
Configure Port2 as LAN1(Transparent Bridging mode) and connect to the LAN PCs
(IP range: 192.168.1.x/24, default gateway: 192.168.1.1). LAN PCs may uses the
original IP address to access the Internet.
Configure Port3 as WAN2 (61.11.11.12) and connect to the gateway's DMZ.
Configure Port4 as DMZ1 (Transparent Bridging mode) and connect it to the server in
DMZ (using WAN2's IP address). PCs may use the original IP addresses to access the
Internet.
118

Advertisement

Table of Contents
loading

Table of Contents