Planet Networking & Communication CS-2001 User Manual page 228

10.1.2 Using Multiple Virtual Servers to Host a Web Site
through the Regulation of a Policy
Step 1. Set up multiple web servers in the LAN using the IP addresses:
192.168.1.101, 192.168.1.102, 192.168.1.103 and 192.168.1.104.
Step 2. Under Policy Object > Virtual Server > Port Mapping, set as below:
（Figure 10-9）

Name

Server Real IP: Select Port3 (WAN2) and type 211.74.99.122 into the
field or click Assist Me to select an IP address.

Service: select HTTP(80).

WAN Port: Change "80" into "8080".

Scheduling Algorithm: Select "Round-Robin".

Interface: Select Port1 (LAN1).

IP of Virtual Server 1: Enter 192.168.1.101 (or you may click on
Assist Me)

IP of Virtual Server 2: Enter 192.168.1.102 (or you may click on
Assist Me)

IP of Virtual Server 3: Enter 192.168.1.103 (or you may click on
Assist Me)

IP of Virtual Server 4: Enter 192.168.1.104 (or you may click on
Assist Me)

Click OK.
Type a name for the Virtual IP setting.
:
（Figure 10-10）
227