Planet Networking & Communication CS-2001 User Manual page 344

For B Company, set as below:
Step 1. Go to Policy Object > VPN > IPSec Autokey, and then click New Entry.
（Figure 11-170）
Step 2. Type VPN_01 in the Name field and then select Port2(WAN1) for WAN
Interface.
（Figure 11-171）
Step 3. For Remote Settings, select Remote Gateway (Static IP or Hostname),
and enter the management address of A Company (WAN pot 1).
11-172）
Step 4. Select "Pre-Shared Key" for Authentication Method and enter the
Pre-Shared Key String.
Step 5. Below Encryption and Data Integrity Algorithms, select "3DES" for
Encryption Algorithm; select "MD5" for Authentication Algorithm;
select "DH 1" for Key Group.
Figure 11-170 IPSec Autokey Screen
Figure 11-171 Name and WAN Interface Settings
Figure 11-172 Remote Settings
（Figure 11-173）
Figure 11-173 IPSec Algorithm Settings
（Figure 11-174）
343
（Figure