Planet Networking & Communication CS-2001 User Manual page 637

Step 3. Go to Web VPN / SSL VPN > Settings and then set as below:

Click Modify.

Tick Enable Web VPN / SSL VPN.

Select the IP Version.

Enter the Client IP address / netmask.

Select the Encryption Algorithm and the Communication Protocol.

Enter the Server Port No.

Configure the Available Subnets.

Click OK.

Click New Entry.

Type the name in the Name field.

Select the authentication account / group from the drop-down list.

Click OK.
（Figure 21-5）
（Figure 21-6）
（Figure 21-7）
（Figure 21-8）
Figure 21-5 Web VPN / SSL VPN Settings
636