Planet Networking & Communication CS-2001 User Manual page 338

Step 9. Setting completed.
Step 10.
Select Policy Object > VPN > IPSec Autokey, and then click New
Entry.
Step 11.
Type VPN_02 in the Name field and then select Port3(WAN2) for the
WAN Interface.
Step 12.
Remote Settings: Select Remote Gateway (Static IP or Hostname)
and then type B Company's IP address in the field.
Step 13.
Select "Pre-Shared Key" for Authentication Method and enter the
Pre-Shared Key String.
（Figure 11-154）
Figure 11-154 IPSec Autokey Settings Completed
（Figure 11-156）
Figure 11-156 Name and WAN Interface Settings
Figure 11-157 Remote Settings
（Figure 11-158）
Figure 11-158 Authentication Method Settings
（Figure 11-157）
337