Planet Networking & Communication CS-2001 User Manual page 270

11.1.2 Creating an IPSec VPN Connection under Windows
2000 by a CS-2001 Device
Prerequisite Setup (Note: IP addresses used as examples only)
A Company uses a CS-2001 device:
Configure Port1 as LAN1(192.168.10.1). IP address range:192.168.10.x/24
Configure Port2 as WAN1(61.11.11.11) and connect it to the ADSL Termination Unit
Remote to access the Internet.
B Company uses a PC running Windows 2000:
IP address: 211.22.22.22.
This example is to establish VPN connection between A Company and B Company.
For A Company, set as below:
Step 1. Under Policy Object > VPN > IPSec Autokey, click New Entry.
11-48）
Step 2. Enter ipsec1 in the Name field and then select Port2 (WAN1) for WAN
Interface.
Figure 11-49 Configuring the Name and the WAN Interface for the IPSec
Step 3. For Remote, select Remote Gateway or Client—Dynamic IP.
Figure 11-48 IPSec Autokey Screen
（Figure 11-49）
269
（Figure
（Figure