Snmp - Planet Networking & Communication IVR-100 User Manual

4.4.6 SNMP

This page provides SNMP setting of the Gateway as shown in
Object
Enable SNMP
Read/Write Community
System Name
System Location
System Contact
Apply Settings
Cancel Changes
Industrial 5-Port 10/100/1000T VPN Security Gateway
Figure 4-18: SNMP
Disable or enable the SNMP function.
The default configuration is enabled.
Allows entering characters for SNMP Read/Write Community of the
Gateway.
Allows entering characters for system name of the Gateway.
Allows entering characters for system location of the Gateway.
Allows entering characters for system contact of the Gateway.
Press this button to save and apply changes.
Press this button to undo any changes made locally and revert to
previously saved values.
- 48 -
Figure 4-18.
Description
IVR-100