Updating Software - Planet Networking & Communication CS-2001 User Manual

1.4 Updating Software

Step 1. To run a software update, go to System > Administration > Software
Update and follow the steps below:

Click Browse to locate the software and then open it.

Click OK to proceed to update the software.
Important：
1. It takes about 3 minutes to run through the update process, and will reboot after the update.
During the update, please do not turn off the power, disconnect the Internet or close the
management interface due to the possibility of causing system errors. It is strongly
recommended to run the update from within the internal
Figure 1-7 Updating the Software
35
（Figure 1-7）
network.