Planet Networking & Communication CS-2001 User Manual page 330

Step 10.
Select Policy Object > VPN > Trunk, click New Entry and then set
as below: （Figure 11-139）

Name: Type a name.

Local Settings: Select "LAN". Local IP / Netmask: Type
"192.168.20.0" as B Company's subnet address and "255.255.255.0"
as Mask.

Remote Settings: Select Remote IP / Netmask. Remote IP /
Netmask: Type "192.168.10.0" as A Company's subnet address and
"255.255.255.0" as Mask.

Tunnel: Select "ipsec2"and then add it to the right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK. （Figure 11-140）
Figure 11-139 VPN Trunk Settings
329