Example - Planet Networking & Communication CS-2001 User Manual

31.1 Example

31.1.1 Remote Controlling a PC
Step 1. Supposing the MAC address of the PC that is desired to be remotely
controlled is 00:0C:76:B7:96:3B.
Step 2. Under Monitoring > Wake-On-LAN > Settings, click New Entry and
then set as below:

Enter the name in the field.

Enter 00:0C:76:B7:96:3B in the MAC Address field.

Click OK.
Step 3. Click WakeUp to start up the PC.
（Figure 31-1）
Figure 31-1 Wake on LAN Setting
Figure 31-2 Clicking "WakeUp" to Start up the PC
（Figure 31-2）
815