Planet Networking & Communication CS-2001 User Manual page 671

Step 5. Go to Policy > Outgoing and then set as below:

Select the defined group from the Web Filter drop-down list.

Select the defined rule from the Application Blocking drop-down list.

Click OK.
Figure 22-16 Applying Application Blocking to the Policy
Note:
1. The Deny ALL feature of a policy can block the packets that meet the criteria. The IT
administrator can adjust the order of this policy to the first rank so as to stop LAN users from
accessing specific IP address.
（Figure 22-17）
Figure 22-17 Policy Created
670
（Figure 22-16）