Planet Networking & Communication CS-2001 User Manual page 95

Step 3. Select WAN for Interface Type:

Static IP Address:
 Enter the IP Address, Netmask and Default Gateway.
 Enter the Max. Downstream Bandwidth and the Max.
 Tick Ping, HTTP and HTTPS.
 Click OK.

Dynamic IP Address (Cable Modem User):
 Click the Renew button to get the IP Address automatically.
 Click the Clone MAC Address button to get the MAC Address if
 Enter the Username if required.
 Enter the Domain Name if required.
 Enter the Max. Downstream Bandwidth and the Max.
 Tick the Ping, HTTP and HTTPS.
 Click OK.

PPPoE (ADSL Dial-Up User):
 Enter the Account Name.
 Enter the Password.
 IP Address Obtained from ISP Via: select Dynamic.
 Enter the Max. Downstream Bandwidth and the Max.
 Tick Ping, HTTP and HTTPS.
 Click OK.
（Figure 3-4）
Upstream Bandwidth.
（Figure 3-5）
required.
Upstream Bandwidth.
（Figure 3-7）
Upstream Bandwidth.
（Figure 3-9）
（Figure 3-6）
（Figure 3-8）
94