Planet Networking & Communication CS-2001 User Manual page 340

Step 18.
Settings completed.
Step 19.
Under Policy Object > VPN > Trunk, set as below:

Name: Type a name.

Local Settings: Select "LAN". Local IP / Netmask: Type
"192.168.10.0" as A Company's subnet address and "255.255.255.0"
as Mask.

Remote Settings: Select Remote IP / Netmask. Remote IP /
Netmask: Type "192.168.20.0" as B Company's subnet address and
"255.255.255.0" as Mask.

Tunnel: Select "VPN_01" and "VPN_02" and then add them to the
right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
（Figure 11-163）
Figure 11-163 IPSec Autokey Settings Completed
（Figure 11-165）
339
（Figure 11-164）