Planet Networking & Communication CS-2001 User Manual page 702

24.1.1 Creating an A Record to Load Balance a Web Server
Using the Backup Mode
Step 1. Go to Advance > Inbound Balancing > Settings and proceed with the
following settings:

Click New Entry.

Type the domain name.

Tick Enable DNS zone.

Click New Entry.

Select A (Address) for DNS Record Type.

Type www in the Host Name field.

Real IP Address, select WAN1 and then enter 61.11.11.11 in the field.

Select Round-Robin for Load Balancing Mode.

Click OK.

Click New Entry again.

Select A(Address) for DNS Record Type.

Type www in the Host Name field.

For Real IP Address, select WAN2 and then type 211.22.22.22.

For Load Balancing Mode, select Backup and then select WAN1 from
the drop-down list.

Click OK.
（Figure 24-2）
（Figure 24-3）
（Figure 24-4）
（Figure 24-5）
Figure 24-2 Adding a New Domain Name
701