Ddns - Planet Networking & Communication CS-2001 User Manual

2.6 DDNS

Step 1. Go to System > Configuration > Dynamic DNS, and set as below:
2-31）

Click New Entry. Select a Service Provider from the drop-down list.

Tick Use the IP of on the right of WAN IP and then select a WAN
port.

Type the Username, Password and Hostname accordingly.

Click OK.
Note:
1. The meaning of the symbols used in DDNS are as follows:
Symbol
Meaning
2. If you do not have a DDNS account, you may first select a desirable service provider from the
pull-down menu and then click Sign up next to it to register an account.
（Figure 2-32）
Figure 2-31 Configuring the Dynamic DNS Settings
Figure 2-32 Configuring the Dynamic DNS Settings
Successful
Connection Connection
Failed Connected
76
（Figure