Planet Networking & Communication CS-2001 User Manual page 360

Step18.
Go to Policy Object > VPN > Trunk, click New Entry and then set as
below: （Figure 11-213）

Type the name in the Name field.

Local Settings: select LAN. Enter the IP address and the Mask in the
Local IP / Netmask field.

Under the Remote Settings section, select Remote IP / Netmask and
then enter the subnet and the mask.

Move the VPN_02 from the Available Tunnels to the Selected
Tunnels.

Tick Enable NetBIOS Broadcast over VPN.

Click OK. （Figure 11-214）
Figure 11-213 Configuring the Second Trunk
Figure 11-214 The Second Trunk Created
359