Planet Networking & Communication CS-2001 User Manual page 262

Step 11.
Under Policy > Incoming, set as below:

Select the defined trunk for VPN Trunk.

Click OK.
Figure 11-30 Creating an Incoming Policy with VPN Trunk
Note：
1. Under Policy Object > VPN > IPSec Autokey, if Remote Gateway or Client – Dynamic IP
is selected under Remote Settings, then Aggressive mode must be selected for Mode and the
MY ID field and the Peer ID field must be completed for the connection.
（Figure 11-31）
Figure 11-31 An Incoming Policy with VPN Trunk
（Figure 11-30）
261