Planet Networking & Communication CS-2001 User Manual page 375

11.1.6 Using Two CS-2001 Devices to Establish PPTP VPN
Connection (Outbound Load Balancing)
Prerequisite Setup (Note: IP address used as examples only)
A Company: Configure Port1 as LAN1(192.168.10.1). IP range: 192.168.10.x/24.
Configure Port2 as WAN1(61.11.11.11) and connect it to the ADSL
Termination Unit Remote (ATUR) to access the Internet.
Configure Port3 as WAN2(61.22.22.22) and connect it to the ADSL
Termination Unit Remote (ATUR) to access the Internet.
B Company: Configure Port1 as LAN1(192.168.20.1). IP range:192.168.20.x/24.
Configure Port2 as WAN1(211.22.22.22) and connect it to the ADSL
Termination Unit Remote (ATUR) to access the Internet.
Configure Port3 as WAN2(211.33.33.33) and connect it to the ADSL
Termination Unit Remote (ATUR) to access the Internet.
A Company's WAN port 1 and B Company's WAN port 1;
A Company's WAN port 2 and B Company's WAN port 2.
This example is to use two CS-2001 devices to establish VPN connection between A
Company and B Company.
For A Company, set as below:
374