Advertisement
Quick Links
802.11n Pocket
30FPS
WPG-130N
Presentation Gateway
1. Package Contents
Thank you for choosing PLANET WPG-130N. Before
installing the device, please verify the contents inside the
package box.
WPG-130N
Quick Guide
World-Wide Adapter Set
Power Adapter
(US/EU/UK)
If there is any item missed or damaged, please
contact the seller immediately.
Note
3. Hardware Installation
Step 1: Please turn on your projector first, and connect
the WPG-130N to the projector via VGA port.
Now you can power on WPG-130N.
Step 2: When the projector shows the default screen as
below, it indicates WPG-130N is ready now.
CD-ROM
VGA Adapter
– 1 –
Power
Power
Adapter
– 3 –
2. Physical Installation
Front Panel Description
Power Connector
(5V DC Input)
Power LED
Rear Panel Description
VGA Connector
4. Software Installation – Windows
Default SSID: WPG-130N
Step 1: Site survey the wireless signal of WPG-130N,
and connect your PC with it wirelessly.
* The connection information can be found from the
projector screen.
Default IP Address: 192.168.1.1
Reset Button
– 2 –
– 4 –
Advertisement
Related Manuals for Planet Networking & Communication WPG-130N
Summary of Contents for Planet Networking & Communication WPG-130N
- Page 1 Step 1: Please turn on your projector first, and connect the WPG-130N to the projector via VGA port. Step 1: Site survey the wireless signal of WPG-130N, Now you can power on WPG-130N. and connect your PC with it wirelessly.
- Page 2 PDA is enabled, and connect the Smartphone or PDA with WPG-130N. 2) Open the browser of the smartphone or PDA, and it would redirect to the WPG-130N web page (or you can enter the default IP address 192.168.1.1 to access it.). Download the MobiShow client software, and execute the installation program.