Table of Contents
Advertisement
Password
Empty
Click on refresh button to update the status.
VPN Tunnel
Display the status.
Client IP
Display the IP address.
3.2.23 SNMP
The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. If you are not
familiar with SNMP, please consult your Network Administrator or consult SNMP reference material. You must first enable SNMP on the
SNMP Agent Configuration screen.
Item
SNMP
SNMP Port
Trap Port
Configuration
Community Name public/private Every unit with SNMP enable must be configured to recognize
Wireless Subscriber Gateway
sensitive.
Enter the user password provided by your ISP. The password
can consist of up to 80 alphanumeric characters and is case
sensitive.
Click on Start/Stop connection button to start/stop PPTP
connection.
Figure 3-154 SNMP Setting Screen
Default
Disable
Disables or enables the SNMP management.
161
If the SNMP enables, also allowed to specific the SNMP port
number via NAT. The allowed SNMP port numbers are 161
162
(default), 16100-16199 and Trap port numbers are 162 (default),
16200-16299. This Port setting is useful for remote control via
NAT network.
one or more community names up to 20 characters. The default
setting for the community of entry 1 is "public" and for the entry 2
is "private" and others are empty.
Description
103
Advertisement
Table of Contents
