Planet Networking & Communication CS-2001 User Manual page 745

Remove Blocking Command

This command instructs the core switch to discontinue blocking an IP/MAC
address.
Show Blocking Commands

This command is used to view the IP/MAC addresses that the switch is blocking.
Note:
1. When the system detects the internal anomaly flow, the switch will use the following variables
to block IP/MAC address, unblock already blocked IP/MAC addresses and view IP/MAC
addresses.
 _ip_: indicates a blocked IP address.
 _mac_: indicates a blocked MAC address.
 _port_: indicates one of the switch ports.
744