Planet Networking & Communication CS-2001 User Manual page 327

For B Company, set as below:
Step 1. Under Policy Object > VPN > IPSec Autokey, click New Entry and then
set as below:
Step 2. Enter ipsec2 in the Name field and then select Port2 (WAN1) for WAN
Interface.
Step 3. Remote Settings : Select Remote Gateway (Static IP or Hostname), and
then enter the management address of A Company.
Step 4. Select "Pre-Shared Key" for Authentication Method, and enter a
Pre-Shared Key String. ( The maximum length of Pre-Shared Key String
is 103 characters)
（Figure 11-130）
Figure 11-130 IPSec Autokey Screen
（Figure 11-131）
Figure 11-131 Name and WAN Interface Settings
Figure 11-132 Remote Settings
（Figure 11-133）
Figure 11-133 Authentication Method Settings
（Figure 11-132）
326