Planet Networking & Communication CS-2001 User Manual page 709

24.1.2 Creating an A Record to Load Balance a Web Server
Using the Round-Robin Mode
Step 1. Go to Advance > Inbound Balancing > Settings and proceed with the
following settings:

Click New Entry.

In the Domain Name field, enter the domain that you obtained from
your ISP.

Tick Enable DNS zone.

Click New Entry.

Select A(Address) for DNS Record Type.

Type www in the Host Name field.

For Real IP Address, type 61.11.11.11 and select WAN1 from the
drop-down list.

For Load Balancing Mode, select Round-Robin.

Click OK. Select 1 for Weight and 1 for Priority.

Click New Entry.

Select A(Address) for DNS Record Type.

Type www in the Host Name field.

For Real IP Address, type 211.22.22.22 and select WAN2 from the
drop-down list.

Select Round-Robin for Load Balancing Mode.

Click OK. Select 2 for Weight and select 2 for Priority.
（Figure 24-12）
（Figure 24-13）
（Figure 24-14）
Figure 24-12 Adding New Domain Name
708
（Figure 24-15）