Planet Networking & Communication CS-2001 User Manual page 398

Step 1. Go to Policy Object > VPN > PPTP Server and then set as below:
11-282）

Click Modify.

Click Enable PPTP.

Click Encryption.

Tick Allow Internet access via and then select the port.

Auto-disconnect if idle for: enter 0.

Enter the Client IP – IP Range.

Click OK.
Note:
1. The IT administrator may enable or disable the external users to access the Internet via the
CS-2001 device when they establish a VPN connection to the CS-2001 PPTP Server.
2. Auto-disconnect if idle for: if the VPN connection is idle for the specified minutes, it will be
disconnected automatically.
Figure 11-282 Enabling the PPTP Server
397
（Figure