Planet Networking & Communication CS-2001 User Manual page 123

Step 4. Under Network > Interface, set as below:

Click Port4's Modify button.

Select DMZ for Interface Type.

Select Transparent Bridging for Connection Type.

Tick Ping, HTTP and HTTPS.

Click OK.
Figure 3-29 DMZ Interface Using Transparent Bridging
Step 5. Go to Network > Interface Group and then set as below:

Configure Port1(WAN1) and Port2(LAN1) as Group 1.

Configure Port3(WAN2) and Port4(DMZ1) as Group2.

Click OK.
Important：
1. Then, the CS-2001 may operate as two individual switches. Port1(WAN1) and Port2 (LAN1)
connect to the LAN, Port3(WAN2) and Port4(DMZ1) connect to the DMZ. The PCs under
two different switches may not connect to each other.
Figure 3-30 Interface Group Settings
122
（Figure 3-29）
（Figure 3-30）