Planet Networking & Communication CS-2001 User Manual page 324

Step 10.
Under Policy Object > VPN > Trunk, set as below:

Name: Type a name.

Local Settings: Select "LAN". Local IP / Netmask: Type
"192.168.10.0" as A Company's subnet address and "255.255.255.0"
as Mask.

Remote Settings: Select Remote IP / Netmask. Remote IP / Mask:
Type "192.168.20.0" as B Company's subnet address and
"255.255.255.0" as Mask.

Tunnel: Select "ipsec1" and then add it to the right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK. （Figure 11-125）
Figure 11-124 VPN Trunk Settings
Figure 11-125 VPN Trunk Created
323
（Figure 11-124）