Planet Networking & Communication CS-2001 User Manual page 354

For A Company, set as below:
Step1. Go to Policy Object > VPN > IPSec Autokey and then click New Entry.
（Figure 11-195）
Step2. Type VPN_01 in the Name field and then select Port2(WAN1) for
Interface. （Figure 11-196）
Figure 11-196 Configuring the Name and the Interface
Step3. Under the Remote Settings section, select the Remote Gateway (Static IP
or Hostname) and then fill the blank.
Figure 11-197 Configuring the Static IP or Hostname
Step4. Select Pre-Shared Key for Authentication Method and then enter the
Pre-Shared Key String.
Figure 11-198 Configuring the Authentication Method
Step5. Under the ISAKMP Algorithm section, select 3DES for Encryption
Algorithm, select MD5 for Authentication Algorithm and then select DH
1 for Key Group.
CS-2001 UTM Content Security Gateway User's Manual
Figure 11-195 IPSec Autokey
（Figure 11-197）
（Figure 11-198）
（Figure 11-199）
353