Planet Networking & Communication CS-2001 User Manual page 260

Step 8. Settings completed.
Step 9. Under Policy Object > VPN > Trunk, set as below:

Name:Type a name.

Local Settings : Select "LAN". Local IP / Netmask : Type
"192.168.10.0" as A Company's subnet address and 255.255.255.0 as
Mask.

Remote Settings: Tick "Remote IP / Netmask". Remote IP /
Netmask: Type "192.168.85.0" as B Company's subnet address and
255.255.255.0 as Mask.

Tunnel: Select "IPSec tunnel" and then add it to the right column.

Tick Enable NetBIOS Broadcast over VPN.

Click OK.
（Figure 11-25）
Figure 11-25 IPSec Autokey Settings Completed
（Figure 11-27）
259
（Figure 11-26）