Planet Networking & Communication CS-2001 User Manual page 137

Note:
1. To save the configured data from Policy Object > Address > WAN / LAN / DMZ as a file for
storage or modification, use Export data entries. If the list needs to be restored due to
accidential modifications etc., use Import data entries.
2. To assist with the configuration, you may click on the Clone MAC Address button
3. To assign the IP address to the MAC, go to System > Configuration > DHCP and configure
the settings under the Assign a Static IP Address section.
4. By default, three address settings, namely Inside_Any, Outside_Any and DMZ_Any, appear
separately under Policy Object > Address > LAN / WAN / DMZ. Each of the settings
represents all the IP addresses from its network.
5. Configuring Policy Object > Address > WAN / DMZ is the same as Policy Object >
Address > LAN. However, Policy Object > Address > WAN does not require setting a
MAC Address or Interface.
to automatically obtain the user's MAC address.
136