Step 2. Under Advance > Co-Defense System > Core Switch, set as below:
26-3)
Enter the name to identify the switch.
Select the model of the switch from the Switch Model drop-down list.
Select IPv4 from the IP Version drop-down list。
Enter the switch's IP address in the IP Address field.
Enter the port number, username and password to establish a telnet
connection with the switch.
Click OK.
Click the View button to view the core switches blocking
Click the Modify button to modify the core switches connection
Click the Remove button to delete the core switches connection
Clicking on the Remove Blocked Address link to remove a IP or
(Figure 26-4)
commands.
settings.
settings.
MAC address which is blocked by the core switch.
Figure 26-3 Configuring the Core Switch Connection
746
( Figure