Planet Networking & Communication CS-2001 User Manual page 323

Step 8. Select "Aggressive mode" for Mode. Enter 11.11.11.11 in the My ID field
and then enter @abc123 in the Peer ID field.
Note：
1. MY ID / Peer ID Settings:
 The ID will be the same as the WAN IP if you leave the field blank.
 MY ID and Peer ID should be different and be choosen from an IP address not currently
being used by something else, such as, 11.11.11.11, 22.22.22.22.
 The symbol @ should be added before the ID, such as, @123a, @abcd1.
Step 9. Settings completed.
Figure 11-122 Mode Settings
（Figure 11-123）
Figure 11-123 IPSec Autokey Settings Completed
（Figure 11-122）
322