Planet Networking & Communication CS-2001 User Manual page 620

Step 4. Go to IDP > Signatures > Custom and set as below:

Type the name in the Name field.

Select IPv4 for IP Version and TCP for Communication Protocol.

Type the Source Port No.

Type the Destination Port No.

Select High for Risk Level.

Select Drop for Process.

Tick Log and Alert for Action.

Tick Ignore Packet direction and Ignore letter case for Advanced
Options.

Type the content pattern in the field.

Click OK. （Figure 19-7）
Figure 19-6 Custom Signature Settings
Figure 19-7 Custom Signature Completed
619
（Figure 19-6）