Planet Networking & Communication CS-2001 User Manual page 58

Step 4. Go to Policy > Outgoing and configure the following settings:

Click on New Entry.

Source Address: Select the name of the LAN addresses.
(LAN1_Subnet1)

Action: Tick Port 3 (WAN2).

Click on Advanced Settings. For Port3 (WAN2) select Automatic.

Click on OK.

Click on New Entry.

Source Address: Select the LAN subnet (LAN1_Subnet2).

Action: Tick the required WAN port.

Port 2 (WAN1): Select Routing.

Port 3 (WAN2): Select Automatic.

Click OK.
（Figure 2-12）
（Figure 2-13, 2-14）
Figure 2-12 The First Outgoing Policy Settings
57