Planet Networking & Communication CS-2001 User Manual page 247

Terms in One-Step IPSec
One-Step IPSec

One-Step IPSec merely takes one step to complete settings
 Go to Policy Object > VPN > One-Step IPSec, and then refer to the
following to configure:

Type a name for the connection in the Name field.

Select a WAN port for WAN Interface.

Select LAN and then select the Subnet / Mask addresses.

Specify the IP address or domain name of the destination gateway in
Remote Gateway – Fixed IP or Domain Name.

Specify the subnet and mask addresses in the Subnet / Mask fields.

Type a word string as Pre-Shared Key String in the Pre-Shared Key
String field.

Click OK.

The device will automatically finish other related but necessary
settings and create a corresponding policy for the connection.
11-2, 11-3, 11-4, 11-5）
Figure 11-1 One-Step IPSec Settings
Figure 11-2 Setting Completed
246
（Figure 11-1）
（Figure