Planet Networking & Communication CS-2001 User Manual page 165

Terms in Authentication
Authentication Management

Provides basic settings for managing authentication:

Authentication Port
authentication. By default, it is 82.

Authentcation Idle
for a period of time, it will expire. The default is 30 minutes.

Log off users that have logged in
authenticated connection. Authentication expires on the due time.

Allow password
password by themselves.

Deny multi-login if auth user has
logged in with his / her own authentication account no other user is
permitted to log in to the same account.

Successful Authentication Redirect
redirected to the designated web site by assigning its address to this field.
Leaving it blank means the user will just go directly to their desired web
site.

Login Display
login screen. Leaving it blank will result in no message be shown.

Go to Policy Object > Authentication > Settings and configure as
below:
Number: The port number designated for
Timeout: If an authenticated connection has been idle
modification: The authenticated users may change the
Message: The message shown (HTML supported) in the
（Figure 8-1）
for: Determines the valid time for the
login: When enabled, once a user has
URL: Authenticated user can be
164