Installing The Hard Disk Unit (Optional) - Kyocera FS-C5015N Service Manual

1-2-8

Installing the hard disk unit (optional)

<Procedure>
1. Turn off printer power.
2. Remove the two screws and remove the
optional interface slot cover.
3. Insert the hard disk unit into the optional
interface slot.
4. Use the two screws to secure the hard disk
unit.
5. Format the hard disk unit. (Refer to the
operation guide.)
Downloaded from www.Manualslib.com manuals search engine
Optional interface slot
Hard disk unit
Cover
Screws
Figure 1-2-17
2HJ/2HK
1-2-11