(3) Detaching and refitting the laser scanner unit
Procedure
1. Remove the right cover and left cover.
(See page 1-5-3)
2. Remove the document processor.
(See page 1-5-11)
3. Remove the scanner unit.
(See page 1-5-13)
4. Remove the connector from the main
PWB.
5. Remove the screw and grounding ter-
minal.
6. Release three clamps and then remove
the wires.
7. Unhook the hook and then remove the
right front upper cover.
8. Unhook the hook and then remove the
left front upper cover.
9. Remove the one screw on upper cover
rack.
Right front
upper cover
Screw
1-5-16
Connector
Hook
Wire
Screw
Grounding
terminal
Clamps
Figure 1-5-22
Left front
upper cover
Upper cover rack
Hook
Figure 1-5-23
2MF/2MG
Main PWB
YC3